So i have decided to work with a system that consists on making at least one job a day
Otherwise working on so many bikes seems imposiible and all i do is having a bunch of spares everywhere so today it was the TZR 3MA's turn
I found the 3XV sprocket carrier (i will run a 3XV rear wheel setup) and changed the bearing and seal , i also had a Talon aluminium rear sprocket which is identical with the TZ 250 3AK model BUT the holes are a little smaller , not a problem if you have a good drill ....
So here is the sprocket carrier
And here it is finished
I also removed the bearnings from the front wheel , almost new wouldn't you say ?
And here are the wheels ,ready for cleaning and respraying
Otherwise working on so many bikes seems imposiible and all i do is having a bunch of spares everywhere so today it was the TZR 3MA's turn
I found the 3XV sprocket carrier (i will run a 3XV rear wheel setup) and changed the bearing and seal , i also had a Talon aluminium rear sprocket which is identical with the TZ 250 3AK model BUT the holes are a little smaller , not a problem if you have a good drill ....
So here is the sprocket carrier
And here it is finished
I also removed the bearnings from the front wheel , almost new wouldn't you say ?
And here are the wheels ,ready for cleaning and respraying
No comments:
Post a Comment