Plastic glue DIY

First of all i want to give my compliments to the member of the 2strokers.com forum GMS that found this 2-component glue

This is pretty easy and will solve lots of  problems with your plastic fairings , big or small it does not matter all you need is this 2 component glue, a dremel and a chair to sit while you are working

First of all let me introduce you to the glue

The little bottle on the left is a cyanoacrylic glue and the bottle on the right is a powder that we will need to strengthen our repir and fill gaps between the cracks

So let's begin

Here we have a Honda NSR 250 sidepanel that split in 2 pieces

First we put it to gether with paper tape or pliers

Then we mark the line of the crack with our dremel so we can create a passage for the glue

Then we start putting the liquid glue ,make sure that you are aiming for the cracked area

Then powder the glue with the second bottle

If you want your repair to be stronger repeat the procedure on the front surface

And voila good as new

The benefits of this glue are

1)It dries almost instantly
2)It does not leave big repair marks like fiber glass does
3)It works at almost all type of plastics

I am going to show you another repair to a TZR 250 1KT headlight mask , this time i will not write anything i will only show you the steps with photos

DAMAGE

STEP 1 

STEP 2 

STEP 3

STEP 4 

AFTER 2 MINUTES